A.V. Techno Soft India Private Limited

Additional Information:

• Delivery Time: 10 Days

• Working Environment: Outdoor
• Supply Voltage: 220V/110V
• Frequency: 50Hz
• Power Consumption: 60 W
• Opening and Closing Time : 3 Sec
• Dimensions(D*W*H) : 280*355*1050 mm
• Maximum Boom Length(L*W*H) : 4000*60*100 mm
• Boom Profile: Octagonal
• Operating Temperature : -20 to +70°C
• Protection Level: IP55
• Net Weight: 50kg (Not Including Boom)
• Standard Accessories: Push Button

Additional Information:

• Delivery Time: 7 Days

Additional Information:

• Delivery Time: 7 Days

LEAPTOR, E-242 flap barrier is available as a single- or multiple-lane setup and is compatible with most access control systems, such as biometrics, proximity readers and face identification devices. The flap barrier has features like high throughput rate, user acceptance, comfort, attractive design and different levels of security to prevent unauthorized access, pedestrian safety has also been taken into account. It has a special feature of allowing one person at time to avoid tailgating.


Key Features : -

E-242 is designed with sleek magnificent looks to control the pedestrian flow smoothly. Its housing and barriers are made up of splash proof SS 304 coupled with Acrylic flaps. Its ideally used for wide pedestrian access. It works in various combinations from single-core to combining of dual-core to build multiple lanes. Flap retracts automatically at parking position during emergencies and power failure to safe & quick access to human being. Double anti clipping function, photocell anti clipping and mechanical anti clipping.

Monitoring and counting the pedestrian pass through barrier is possible by system incorporation. Auto reset function, if no passage during identified card reading time, the system reset automatically the passengers are prohibited to pass until their second identified reading. Direction indication LED arrows to provide quick access of direction.

Technical Specifications:-

• Power Supply : 100-240Vac
• Operating Voltage : 24 V
• Frequency : 50Hz
• Power Consumption : 35 W
• Unlock Time : 0.2 sec
• Transaction Rate : 35 Person/min
• Passage Width : 550 mm
• Operating Temperature : -25 to 70°C
• Protection Level : IP55
• Working Environment : Indoor/Outdoor (If Roofed)
• Dimensions(L*W*H) : 1200*280*960mm
• Packaging Dimensions(L*W*H) : 1260*340*1070mm
• Net Weight : 45 kg
• Gross Weight :66 kg

Additional Information:

• Delivery Time: 7 Days

Magtech Flap Barriers ensures security and manages the crowd at the entrance of office buildings, industrial areas, metro stations, public playgrounds, etc.

Flap barriers helps to control and secure the access and allows only one person at a time.

Magtech Flap Barriers ensures security and manages the crowd at the entrance of office buildings, industrial areas, metro stations, public playgrounds, etc.

Flap barriers helps to control and secure the access and allows only one person at a time.

Features :

•  Safety Sensor
•  Aesthetic with Stainless Steel Finish
•  Bi directional operation
•  Lane indicator display
•  Integration with access control devices

• Safety Sensor
•  Aesthetic with Stainless Steel Finish
•  Bi directional operation
• Lane indicator display
• Integration with access control devices
  
  
  Specification : 

Additional Information:

• Delivery Time: 10 Days

Additional Information:

• Delivery Time: 5 Days

Additional Information:

• Delivery Time: 3 Days

Additional Information:

• Delivery Time: 10 Days

We are automatic sliding gate manufacturers in Pune India, S-608 Sliding gate barriers are sleek and magnificently designed to control the pedestrian flow smoothly to work in normally closed mode and retract inside the pedestal after a valid card has been presented to allow the authorized user to pass. Sliding gate a domain that forms the gateway to a visitor’s destination, to manage human traffic in both directions.

Sliding barrier S-608 has housing of splash proof stainless steel 304 and Acrylic flaps are specially designed to provide good aesthetics with much needed strength. The unique sliding arm feature provides a failsafe safety solution in case of emergency or power failure, providing egress in case of crisis evacuations. Durability of automatic sliding gates with minimal maintenance means years and millions of trouble free passages.

• Power Supply : 100-240Vac
• Frequency : 50Hz
• Power Consumption : 35 W
• Unlock Time : 0.2 sec
• Transaction Rate : 35 Person/min
• Working Environment : Indoor
• Operating Temperature : -25 to 70°C
• Passage Width : ≤ 600mm
• Protection Level : IP55
• Dimensions(L*W*H) : 1400*350*980mm
• Packaging Dimensions(L*W*H) : 1520*470*1070mm
• Net Weight : 95kg
• Gross Weight : 120kg

Additional Information:

• Delivery Time: 45 days

LEAPTOR, Single lane H-221 premium flap barrier offers the best space-saving solution amongst the pedestrian barrier series. At the time of unlocking, the advanced design allows the acrylic wings to fully retract into the cabinet, creating an open, attractive look. These CE certified barriers are the best-suited product for pedestrian control at modest price. The range of security gates includes both single and space-saving double lane modifications.  It is conducive to the management of ticket check passages in stations, convention and exhibition centers, and swimming pools.

H-221 barrier housing is made up of splash proof SS 304 with Acrylic flaps. Products durability comes handy with minimal maintenance and the operational sturdiness works for years and millions of trouble free passages. It has voice and strobe light alerts. Under the cover led lights and led strips on provided for flaps. Double anti clipping function, photocell anti clipping and mechanical anti clipping.

• Power Supply : 100–240Vac
• Operating Voltage : 24 V
• Frequency : 50Hz
• Power Consumption : 35 W
• Unlock time : 0.2 sec
• Transaction Rate: 35 Person/min
• Operating Temperature : -25 to 70°C
• Working Environment : Indoor/Outdoor (If Roofed)
• Protection Level : IP55
• Passage Width : ≤550 mm
• Dimension(L*W*H) : 1410*300*1005mm
• Packaging Dimensions(L*W*H) :1460*340*1070mm
• Net Weight : 80 kg
• Gross weight :105kg

Additional Information:

• Delivery Time: 45 Days

Additional Information:

• Delivery Time: 7 Days

Additional Information:

• Delivery Time: 15 Days

Additional Information:

• Delivery Time: 15 Days

Power : 110/220V. 60/50 Hz. AC (% ± 10), 24 V DC.

Single Unit : at stand-by ~10 W, during passage max. ~39 W

Center Unit : at stand-by ~10 + 10 W, during passage max.~ 39 + 39 W

Dimensions  : Single Unit : 1000 x 1020 x 300 + wing length (275) mm Center Unit : 1000 x 1020 x 300 + wing length (275 x 2) mm

Body Features : The body is made of 304-grade (opt. 316-grade) satin finished stainless steel.

Wings : RGB LED illuminated, 10 mm impact resistant tempered glass (opt. polycarbon) wings.

Top Lid : Tempered glass top lid (opt. other materials).

Weight : ~59 kg (single), ~77 kg (center).

Operating Temperature, Humidity, IP Rating : (-20°C) – (+68°C) (opt:- 50°C with heater positive), RH 95% (±2%) non-condensing), IP 44 indoor.

Indicators :  An illuminated acrylic layer under the glass top lid is included. At standby, the acrylic layer illuminated in blue; during authorised passages it flashes green; when an unauthorized attempt is detected or during alert mode it flashes red.

Sliding asteroid animated indicator on top lid is optionally available.

Control System  :  Controlled by dry contact or grounding input. All inputs are opto-coupler protected.

Integration : Compatible with all access control systems that provide dry contact or grounding outputs.

Optional RS232/RS485/TCP IP control module is available.

System Features : Electronically controlled rapid wing movement for quick and smooth bi-directional passages. Internal dip switch selectable free passage by photocell detection, restricted access, controlled access on both or single direction modes are built in features.

Time Out : 3-6-9-12 dipswitch selectable.

Output Data  :   System provides dry contact passage feedback by relays separately for each direction.

System provides busy signal during passage.

LEAPTOR, S-608/2 Sliding barriers are used in spaces like the banks or corporate headquarters where aesthetic excellence is a priority to impress the visitors. When the authorized users have their cards read by the card reader, the wing opens. While the authorized users are passing through the gate, if another person wants to take advantage of the open turnstile and tailgate behind the first visitor, the obstacle closes and blocks the passage immediately and sets off the alarm.

S-608/2 has housing of splash-proof stainless steel 304 and Acrylic flaps are specially designed to provide good aesthetics with much-needed strength. The unique sliding arm feature provides a failsafe safety solution in case of emergency or power failure, providing egress in case of crisis evacuations. Durability with minimal maintenance means years and millions of trouble-free passages.

The anti-punch feature enables the barrier not to close if it detects people inside the passageway. Anti-tailgating allows only one person to pass for an authorized card presented. The anti-panic feature in power off mode allows the barrier to open for people to go through until it is activated. Multi-time and preferential access rights can be programmed. Failure detection and alarm functions ensure product safety and compliance.

• Power Supply : 100-240Vac
• Frequency : 50Hz
• Power Consumption : 35 W
• Unlock Time : 0.2 sec
• Transaction Rate : 35 Person/min
• Operating Temperature : -25 to 70°C
• Passage Width : ≤ 600mm
• Protection Level : IP55 
• Working Environment : Indoor
• Dimensions(L*W*H) : 1400*350*980mm
• Packaging Dimensions(L*W*H) : 1520*470*1070mm
• Net Weight : 125kg
• Gross Weight : 150kg

LEAPTOR, S-310 P Type Gate is an alternative solution for pedestrian entries wherein trolley movements, material handling or handicap wheelchair entries in minimal space. The elegant design makes it suitable for lobby entrances & offers a low to mid-level security. Photoelectric switches reliably detect users and open the wings before they come into contact with them. The barriers close automatically after passage. The unique swing arm feature provides a failsafe safety solution in case of emergency or power failure, providing egress in case of crisis evacuations. These turnstiles paired with different access control systems like finger print controller, face recognition reader as well as card readers.
Key Features : -
Housing & flap made up of splash proof SS 304.Works with any access control or remote switch.Electromechanical drive mechanism.Designed for secured & reliable operation with aesthetics in mind.Auto reset function on: if no passing during identified card reading time, the system will reset automatically the passengers are prohibited to pass until their second identified reading.The barrier can be set to delay closing in 1-60s after a valid card reading.

Technical Specification :-
Power Supply : 220-240VacOperating Voltage : 24VFrequency : 50HzPower Consumption : 50 WTransaction Rate : 40 Person/minPassage Width :

Additional Information:

• Delivery Time: 10 Days

LEAPTOR E-242/2 dual-core flap barrier made of stainless steel 304 housing with acrylic flaps which are aesthetically pleasing. The design of the outer body is made sleek and sturdy which consumes less space & reduced weight. It can be installed in single or multi-lane fashion in the combination of E-242 single-lane model. The passage is electronically controlled in both directions by integrating access control system like biometric access controller, face recognition reader as well as proximity/RFID card readers.

KEY FEATURE

E-242/2 has sleek and magnificent design to control the pedestrian flow smoothly. Its housing and barrier are made up of splash proof SS 304 with Acrylic flaps. It works together with a single core and dual-core to build multiple lanes if required. It gives highest security, with in -built sensors crawling can be avoided. Flap retracts automatically at parking position during emergencies and power failure to safe & quick access to human being.  Double anti clipping function, photocell anti clipping and mechanical anti clipping.
Smooth finishing without exposure to screws ensures a high degree of aesthetics. Auto reset function, if no passage during identified card reading time, the system reset automatically the passengers are prohibited to pass until their second identified reading. Monitoring and counting the pedestrian pass-through barrier is possible by system incorporation. Direction indication LED arrows allows quick access of direction to users.

TECHNICAL SPECIFICATION

Power Supply: 100Vac - 240Vac

Operating Voltage: 24 V

Frequency: 50Hz

Power Consumption: 35 W

Unlock time: 0.2 sec

Pass Rate: 35 Person/min

Operating Temperature: -25°C to 70°C

Working Environment: Indoor/Outdoor (If Roofed)

Protection Level: IP55

Dimensions(L*W*H) : 1200*280*960mm

Packaging Dimensions(L*W*H) : 1260*340*1070mm

Passage Width: <-550 mm

Net Weight: 70kg

Gross Weight : 91kg

Additional Information:

• Delivery Time: 45 Days

Additional Information:

• Delivery Time: 30 Days

LEAPTOR, S-310 P Type Gate is an alternative solution for pedestrian entries wherein trolley movements, material handling or handicap wheelchair entries in minimal space. The elegant design makes it suitable for lobby entrances & offers a low to mid-level security. Photoelectric switches reliably detect users and open the wings before they come into contact with them. The barriers close automatically after passage. The unique swing arm feature provides a failsafe safety solution in case of emergency or power failure, providing egress in case of crisis evacuations. These turnstiles paired with different access control systems like finger print controller, face recognition reader as well as card readers.

• Housing & flap made up of splash proof SS 304.
• Works with any access control or remote switch.
• Electromechanical drive mechanism.
• Designed for secured & reliable operation with aesthetics in mind.
• Auto reset function on: if no passing during identified card reading time, the system will reset automatically the passengers are prohibited to pass until their second identified reading.

• The barrier can be set to delay closing in 1-60s after a valid card reading.

• Power Supply : 220–240Vac
• Operating Voltage : 24V
• Frequency : 50Hz
• Power Consumption : 50 W
• Transaction Rate : 40 Person/min
• Passage Width : <= 600 mm
• Operating Temperature : -25 to 70°C
• Protection Level : IP55
• Dimensions excluding bar(L*W*H) : 200*200*980mm
• Packaging Dimensions (L*W*H) : 1130*228*1040mm
• Net Weight : 35 Kg
• Gross Weight : 55kg

Additional Information:

• Delivery Time: 45 Days

• These are metal cylinder, with ultra high resistance to impact and weather
• Housing & the Raised Structure are available in M.S /S.S
• It is housed inside a compartment in the road parking and discourages traffic and/or parking
• Can be activated or disabled automatically by commands executed by authorized persons or by pre-set time-based automatic commands
• Available as automatic, semi-automatic versions
• Semi- automatic bollards are activated by a key-operated control and subsequently raised automatically via a hydraulic operated actuator
• One of our ranges of anti-terrorism bollards can stop vehicles at speeds of about 50 mph (80 Km/h).

Additional Information:

• Delivery Time: 30 Days

LEAPTOR, E-538 single lane full height turnstile with CE certification is the perfect solution to control the pedestrian traffic. The impenetrable construction virtually eliminates any unauthorized entry to restricted areas. The unique design of turnstiles makes it easy to keep track of pedestrians at heavy traffic areas that are entering into a facility. These are installed away from the main gate to barricade the entrance with surrounding grills. Using full height turnstiles is a popular choice when checking tickets at sports stadiums, amusement parks, and university facilities and places with large number of people roll out. These turnstiles can be paired with different kinds of access control systems like fingerprint access controller, face recognition reader as well as proximity /RFID card readers. A full height turnstile comes with a sealed motorized drive which provides greater reliability and lower maintenance.

E-538 has a housing & rotor arm made of splash proof Stainless Steel 304. It has anti backup device to prevent reverse rotation once the head has moved 30 degree from rest position. It is easy accessibility to electronic control modules. It has a function of electro mechanical drive mechanism. It has automatic reset wings after each pass. It provides bi-directional passage control feature. Excellent surface finish to give a high degree of aesthetic value and also to safe guard the human being passing across. Self-centering mechanism to ensure complete rotation of the head to the rest position. The LED direction indication arrows are provided for easy access on both sides. Power failure options provide unit to remains locked or unlocked during power failure mode.

• Power Supply : 100 – 240Vac
• Frequency : 50 Hz
• Power Consumption : 35 W
• Unlock Time : 0.2 Sec
• Transaction Rate : 35 Person/min
• Operating Temperature : -25 to +70°C
• Humidity : 95 %
• Passage Width : 600 mm
• Ingress Protection : IP55
• Working Environment : Indoor /Outdoor (If roofed)
• Dimensions (L*W*H) : 1400*1200*2310 mm
• Packaging Dimensions (L*W*H) : 2230*1430*780 mm
• Net Weight : 110 kg
• Gross Weight : 210 kg

Additional Information:

• Delivery Time: 30-45 Days

LEAPTOR, E-128 Pillar type tripod turnstile is the perfect solution to control the pedestrian traffic. Tripod turnstiles are compact in design and cost-effective entrance solutions. These are cutting edge solution that provides a combination of reliable mechanical as well as electronic restriction for unauthorized entrants. Turnstiles by design allow only one person to enter per authorization. The 3-arm, tripod turnstile only rotates an arm 120 degrees, enough to let one person pass, and then it locks. These turnstiles are often also used for counting the numbers of people passing through a gate.

• Power Supply : 100-240 Vac
• Frequency : 50Hz
• Power Consumption : 30 W
• Control Circuit : 24 V Dc
• Unlock Time  : 0.2 Sec
• Transaction Rate  : 35 Person/min
• Operating Temperature  : -25 to 70°C
• Passage Width  : 550 mm
• Ingress Protection  : IP55
• Working Environment  : Indoor/Outdoor (If Roofed)
• Dimensions (L*W*H)  : 480*280*960mm
• Packaging Dimension (L*W*H) : 550*330*1050mm
• Net Weight  : 33kg
• Gross Weight  : 42kg

Additional Information:

• Delivery Time: 7-15 Days

Additional Information:

• Delivery Time: 3 Days

Additional Information:

• Delivery Time: 8 Days

LEAPTOR, S-348 Metallic Swing Type Barrier is the best suited product for pedestrian control. These are space efficient security barriers with compact design yet offers sufficient space to integrate any access control systems. These CE certified barriers are the best suited products for pedestrian control in affordable price. These barriers paired with different access control systems like finger print access controller, face recognition reader as well as card readers. The unique arm feature provides a fail-safe safety solution in case of emergency or power failure. It has a special feature of allowing one person at time through each lane to avoid tailgating.

• Sleek and magnificent design used to control the pedestrian flow smoothly.
• Housing and barrier arm is made up of splash proof SS 304.
• With in – built sensors crawling can be avoided.
• Smooth finishing without exposure to screws.
• The barrier gate can be set to delay closing in 1 – 60 sec after a valid card closing.
• Double anti clipping function, photocell anti clipping and mechanical anti clipping.
• The metallic flaps are specially design to prevent the passengers getting harmed passing cross.
• Auto reset function: if no passage during identified card reading time, the system reset automatically the passenger are prohibited to pass until their second identified reading.
• Arrows for direction indication are provided at the top for easy access.

• Power Supply : 100–240Vac

• Operating Voltage : 24 V
• Frequency : 50Hz
• Power Consumption : 35W
• Unlock Time : 0.2 sec
• Transaction Rate : 35 Person/min
• Passage Width : ≤900mm
• Operating Temperature : -25 to 70°C
• Working Environment : Indoor/Outdoor (If Roofed)
• Protection Level : IP55
• Dimensions(L*W*H) : 1400*280*980mm
• Packaging Dimensions(L*W*H) : 1460*340*1070mm
• Net Weight : 70kg

• Gross Weight : 95Kg

Additional Information:

• Delivery Time: 45 Days

LEAPTOR, S-348/2 Metallic Swing Type Barrier is the best suited product for pedestrian control. These are space efficient security barriers with compact design yet offers sufficient space to integrate any access control systems. These CE certified barriers are the best suited products for pedestrian control in affordable price. These barriers paired with different access control systems like finger print access controller, face recognition reader as well as card readers. These swing barriers can be mounted with display, passage counter, card reader, alarm system against unauthorised entries, interfaced with PC. The unique arm feature provides a fail-safe safety solution in case of emergency or power failure. It has a special feature of allowing one person at time through each lane to avoid tailgating.

• Power Supply : 100–240 Vac
• Operating Voltage : 24V
• Frequency : 50Hz
• Power Consumption : 35 W
• Unlock Time : 0.2 Sec
• Transaction Rate : 35 Person/min
• Passage Width : ≤ 900 mm
• Operating Temperature : -25 to 70°C
• Working Environment : Indoor/Outdoor (If Roofed)
• Protection Level : IP55
• Dimensions(L*W*H) : 1400*280*980mm
• Packaging Dimensions(L*W*H) : 1460*340*1070mm
• Net Weight : 95kg
• Gross Weight : 120kg

Additional Information:

• Delivery Time: 45 Days

The S-535/2 full height security turnstiles are designed to control pedestrians entering or exiting restricted areas where perimeter control is required. The turnstile consists of an outer cage section and a center column incorporating a 3 x 120° offset ‘U’ bar configuration. The dimensions of the compartments have been specially designed to achieve flow traffic, as it allows a person to pass through at a normal walking speed, making easier the flow of users. A specially designed mechanism, as a person enters, another compartment is available to be occupied by an individual. They can be fitted for any application with leading-edge technology and features, and integrate with most card reader systems and biometrics.

S- 535/2 has housing & rotor arm which is made of splash proof Stainless Steel 304. Its stainless steel rugged construction ensures trouble free and triggered operation. Anti-backup device prevents reverse rotation once the head has moved 30 degree from rest position. It is an electro mechanical drive mechanism. The automatic resets its wings after each pass. The rotor, top cover and the cage are rugged construction of SS which provides strength as well good aesthetics to the entrance. It provides bi – directional passage control feature. Excellent surface finish to safe guard the human being passing across. Self-centering mechanism to ensure complete rotation of the head to the rest position. LED direction indication arrows are provided for easy access from both sides. Power failure options features that the unit remains locked or unlocked during power failure mode.

• Power Supply : 100– 240Vac
• Frequency : 50Hz
• Power Consumption : 30 W
• Control Circuit : 24 V DC  
• Unlock Time : 0.2 Sec
• Transaction Rate : 30 Person/min
• Operating Temperature : -25°C to 70°C
• Humidity : 95 %
• Passage Width : ≤650 mm
• Ingress Protection : IP55
• Working Environment : Indoor/Outdoor (If roofed)
• Dimensions(L*W*H) : 2400*1500*2310 mm
• Packing Dimension(L*W*H) : 2580*1680*1750 mm
• Net Weight :360 kg
• Gross  Weight : 470 kg

Additional Information:

• Delivery Time: 45 Days

LEAPTOR, E-142 Bridge type tripod turnstile with CE certification is the perfect solution to control the pedestrian traffic. Tripod turnstiles are space efficient security barriers, with a compact design offering yet offer sufficient space to integrate any access control system. The advantage to this type is that people will not able to “jump over the turnstile”; as it is wide in length, Hence It provides more degree of security level. Bridge tripod turnstiles, with rotating arms is an effective, reliable and proven entry control barrier system with a friendly structured enclosure to meet the welcome profile of the application area. The unique design of turnstiles makes it easy to keep track of pedestrians entering into a facility. The 3-arm, tripod turnstile rotates an arm 120 degrees, enough to let one person pass, and then it locks.

E-142 has a housing & barrier arm which is made of splash proof Stainless Steel 304. It’s easy installation & easy to incorporate with existing system. It has steady and noiseless operation. Its unique arm dropping feature provides a fail-safe solution in case of emergency or power failure. Automatic reset of barrier arms after each passage. It has a special feature of allowing one person at time to avoid tailgating. Monitoring and counting the pedestrian pass through gate is also possible. Provisioning of bi–directional passage control is there. Automatic reset of barrier arms after each passage.The LED arrows are provided for easy access for assisting direction access through the same. Tripod turnstiles offer a reliable and efficient method to ensure entry of authorized users only. It permits access via access card reader/face recognition reader / bio metric readers/ bar code readers are optionally provided.

Technical Specification : - (BRIDGE TYPE TRIPOD TURNSTILE E-142 )

• Power Supply : 100-240 Vac   
• Frequency : 50Hz
• Power Consumption : 30 W
• Control Circuit : 24 V Dc
• Unlock Time : 0.2 Sec
• Transaction Rate : 35 Person/min
• Passage Width : 550 mm
• Protection Level : IP55
• Working Environment : Indoor/Outdoor (If Roofed )
• Operating Temperature : -25°C to 70°C
• Dimensions(L*W*H) : 1200*280* 960 mm
• Packing Dimension(L*W*H) : 1250*330*1130 mm
• Net Weight : 35Kg
• Gross weight : 56Kg

Additional Information:

• Delivery Time: 7-25 Days

LEAPTOR, E-343 Metallic Swing Type Barrier is the best suited product for pedestrian control. These are space efficient security barriers with compact design yet offers sufficient space to integrate any access control systems. These CE certified barriers are the best suited products for pedestrian control in affordable price. These barriers paired with different access control systems like finger print access controller, face recognition reader as well as card readers. These swing barriers can be mounted with display, passage counter, card reader, alarm system against unauthorised entries, interfaced with PC. The unique arm feature provides a fail-safe safety solution in case of emergency or power failure. It has a special feature of allowing one person at time through each lane to avoid tailgating.
KEY FEATURE

Sleek and magnificent design used to control the pedestrian flow smoothly.

Housing and barrier arm is made up of splash proof SS 304.

Recommended for heavy passage flow & gateway for outsider entry.

With in – built sensors crawling can be avoided.

Smooth finishing without exposure to screws.

The barrier gate can be set to delay closing in 1 – 60 sec after a valid card closing.

Double anti clipping function, photocell anti clipping and mechanical anti clipping.

The metallic flaps are specially design to prevent the passengers getting harmed passing cross.

Auto reset function: if no passage during identified card reading time, the system reset automatically the passenger are prohibited to pass until their second identified reading.

Arrows for direction indication are provided at the top for easy access.

TECHNICAL SPECIFICATION

Power Supply : 100–240Vac

Operating Voltage : 24 V

Frequency : 50Hz

Power Consumption : 30W

Unlock Time : 0.2 sec

Transaction Rate : 35 Person/min

Passage Width : ≤1100mm

Operating Temperature : -25 to 70°C

Working Environment : Indoor/Outdoor (If Roofed)

Protection Level : IP55

Dimensions(L*W*H) : 1200*280*960mm

Packaging Dimensions(L*W*H) : 1260*340*1070mm

Net Weight : 50kg

Gross Weight : 71Kg

Additional Information:

• Delivery Time: 45 Days